Eppendorf Centrifuge Model 5702

• Minimal heating of samples
• Quick acceleration in 25 seconds or less
• All rotors and accessories are autoclavable (121°C, 20 min.)

• Choice of round buckets with optional aerosol-tight lids or high-capacity square buckets for round-bottom tubes
• Round buckets accommodate conical and round-bottom tubes from 1.1 ml to 85 ml
• Square buckets accommodate round- bottom tubes from 5 ml to 25 ml
• Optional aerosol-tight covers protect the user from hazardous samples*

*Aerosol containment has been tested and approved in accordance with the procedure of Bennett et al. from the Centre for Applied Microbiology & Research in Porton Down, CAMR, Great Britain, and according to annex AA of the IEC 1010-2-020 safety standard. The test procedure simulates the accidental release of biological material (bacteria) inside the closed rotor or closed rectangular bucket. Air and swab samples are taken to ensure that no material is released from the closed rectangular buckets or closed rotor during operation.

• Available with a choice of 10 or 30 steel tube holders
• Accommodates up to 20 x 15 ml conical tubes or 30 x 15 ml round-bottom tubes

• Affordable and simple rotor design
• Accommodates up to 8 x 15 ml conical or round-bottom tubes

	Specifications
		With round buckets	With square buckets
	Maximum Capacity	4 x 85 ml	8 x 25 ml
	Maximum Speed	4,400 rpm	4,400 rpm
	Maximum RCF	3,000 x g	2,750 x g
	Maximum Radius	137 mm	127 mm
	Maximum Vessel Diameter	38 mm	25 mm
	Maximum Vessel Length	121 mm	100 mm
	Swing-bucket Rotor includes 4 x 85 ml round buckets Type A-4-38 022639048	Round bucket(1) set of 4 022639081	Aerosol-tight cover, set of 2 022639293

(Please observe the limiting data from the tube manufacturer regarding the maximum load- bearing capacity of the tubes.)
	1.1–1.4	2–7	2.6–7	4–10	9–15
Max. tube length for all positions below the aerosol-tight lid (mm)*	100	100	100	100	100
Max. tube length for all positions without aerosol-tight lid (mm)*	100	100	100	100	100
Adapter	Set of 2	Set of 2	Set of 2	Set of 2	Set of 2
Catalog No.	022639285	022639102	022639242	022639269	022639129
	5/20	5/20	4/16	4/16	4/16
Adapter bore (dia. mm)	8.5	12.5	13.5	16	17.5
	2,850	2,850	2,850	2,850	2,850
Centrifugation radius (mm)	132	132	132	132	130
	4,400	4,400	4,400	4,400	4,400

(Please observe the limiting data from the tube manufacturer regarding the maximum load- bearing capacity of the tubes.)
Tube capacity (ml)	15 ml conical	15 ml conical	25	50 ml conical	85
Max. tube length for all positions below the aerosol-tight lid (mm)*	120	–	100	115	106
Max. tube length for all positions without aerosol-tight lid (mm)*	121	121	100	115	106
height=65>Adapter	Set of 2	Set of 2	Set of 2	Set of 2	Set of 2
Catalog No.	022639188	022639200(2)	022639145	022639226	022639161
Number of tubes per adapter/per rotor	1/4	2/8	1/4	1/4	1/4
Adapter bore (dia. mm)	17.2	17.2	25	30	38
Max. RCF (g-force)	3,000	3,000	2,900	2,900	2,900
Centrifugation radius (mm)	137	137	135	135	135
Max. rotational speed (rpm)	4,400	4,400	4,400	4,400	4,400

(1) Swing-bucket Rotors are supplied with buckets of one weight class. Adapters and tubes which together do not exceed a maximum weight of 190 g can be put in one round bucket. The total weight of a loaded bucket (including adapters and filled tubes) may not exceed 375 g. The weight given on the rotor applies to buckets including their load.

(2) Cannot be use with aerosol-tight lids.

*If maximum tube length is exceeded, the loading capacity of the adapter may be reduced. Please perform a manual swing test.

Adapter, caps and rotor are autoclavable: 121°C, 20 min.

Swing-bucket Rotor without buckets Type A-4-38 022639064

Rectangular bucket set of 4 022639307

(Please observe the limiting data from the tube manufacturer regarding the maximum load- bearing capacity of the tubes.)
Tube capacity (ml)	5–7	9	15	20	25
Max. tube length for all positions (mm)*	100	100	100	100	100
Adapter	Set of 2	Set of 2	Set of 2	Set of 2	Set of 2
Catalog No.	022639323	022639340	022639366	022639382	022639391
Number of tubes per adapter/per rotor	10/40	8/32	6/24	4/16	2/8
Adapter bore (dia. mm)	13	14.5	17.5	22	25
Max. RCF (g-force)	2,750	2,750	2,750	2,750	2,750
bgColor=#0e2a8a height=19>Centrifugation radius (mm)	127	127	127	127	127
Max. rotational speed (rpm)	4,400	4,400	4,400	4,400	4,400

*If maximum tube length is exceeded, the loading capacity of the adapter may be reduced. Please perform a manual swing test.

Fixed-angle Rotor includes 30 steel sleeves Type F-35-30-17 022639404

Fixed-angle Rotor includes 10 steel sleeves Type F-35-30-17 022639421

Steel sleeve, set of 10 022639439

(Please observe the limiting data from the tube manufacturer regarding the maximum load- bearing capacity of the tubes.)
Tube capacity (ml)	15	15 ml conical
Max. tube length for all positions (mm)*	115(3)	inner ring: 135; outer ring: 120
Catalog No.	022639455	022639447
Number of tubes per rotor for versions with 30 sleeves	30	20
Sleeves (dia. mm)	18	18
Max. RCF (g-force)	2,750	2,700
Centrifugation radius (mm)	127	125
Max. rotational speed (rpm)	4,400	4,400

(3) 105 with a load of conical tubes and round-bottom tubes.

Max. rcf: 1,700 x g Low-noise centrifugation without rotor lid Autoclavable (121°C, 20 min)l Centrifugation of 1.5 ml and 2 ml Eppendorf TubesŽ Adapter for: – 0.2 ml PCR tubes – 0.4 ml centrifuge tubes – 0.5 ml micro test tubes and 0.6 ml MicrotainerŽ tubes

Max. rcf: 1,840 x g Low-noise centrifugation without rotor lid Rotor and adapter autoclavable (121°C, 20 min) Centrifugation of 1 ml–2 ml CryotubesŽ (max. 13 mm, can be used with adapter) and screw-cap centrifugation tubes (max. 17 mm, can be used directly)

Swing-bucket Rotor, 8 x 15 ml Type A-8-17 022639501

(Please observe the limiting data from the tube manufacturer regarding the maximum load- bearing capacity of the tubes.)
Tube capacity (ml)	15	15 ml conical
Max. tube length for all positions (mm)*	120	120
Catalog No. for adapters	022639510	022639528
Number of tubes per rotor	8	8
Sleeves (dia. mm)	18	18
Max. RCF (g-force)	2,750	2,700
Centrifugation radius (mm)	128	128
Max. rotational speed (rpm)	4,400	4,400

*If maximum tube length is exceeded, the loading capacity of the adapter may be reduced.