Eppendorf Centrifuge Model 5702

The compact Eppendorf Centrifuge Model 5702 is a quiet, high-quality centrifuge that provides exceptional value for low-speed centrifugation in the low- to mid-throughput range. It holds a remarkable amount of tubes for its size, and it quickly spins a variety of popular cell culture and blood tubes in a choice of rotors. Accommodating either fixed-angle or swing-bucket rotors, its versatility addresses your exact needs. With state-of-the-art features at an economical price, this centrifuge is sure to please you as well as your budget.

The Centrifuge Model 5702, with its space-saving (12.5 x 16 in) footprint and innovative design, can accommodate a remarkable 30 x 15 ml round-bottom tubes or 20 x 15 ml conical tubes. Your choice of fixed-angle or swing-bucket rotors provides flexibility for low-speed centrifugation of sensitive cells and blood. The A-4-38 Swing-bucket Rotor can spin up to four 85 ml tubes in aerosol-tight buckets at rcf up to 3,000 x g. A variety of adapters accept all common standard, conical and blood collection tubes. For applications requiring higher tube capacity, rectangular buckets for up to 24 x 15 ml glass tubes can be used. Two versions of the
F-35-30-17 Fixed-angle Rotor are available for a capacity of up to 30 x 15 ml. A simple, eight-place swing-bucket rotor is also available for 15 ml conical tubes.

• Extremely compact
• Maintenance-free drive adjustable to speeds up to 4,400 rpm
• Swing-bucket and fixed-angle rotors accommodate a wide range of conical, blood and standard plastic and glass tubes from 1.1 ml to 85 ml
• Automatic “soft-touch” locking
• Quick acceleration and deceleration
• Optimized air flow keeps samples cool
  

A separate short spin button makes quick spins a snap

Convenient features for easy operation

State-of-the-art, yet simple, this centrifuge is easy to operate. The motorized “soft-touch” lid makes loading and closing effortless. The time and speed knobs allow you
to set and adjust these parameters quickly and easily: speed can be set in rpm or rcf (g-force), eliminating the need for tedious calculations; and settings can be changed during a run. You can also lock your settings to protect them against unintentional adjustment.

Once the parameters are set, simply press the time knob to start your pre-programmed run. When complete, an audible signal at the end of the run alerts you to remove your sensitive samples; the motorized lid unlocks automatically for easy, one-handed access.

• Clear digital display and easy-to-use knobs
• Automatic “soft-touch” locking
• Setting in rpm or rcf
• Extremely quiet operation
• Separate short spin button
• Speed can be set from 100 rpm to 4,400 rpm in increments of 100 rpm
• Timer can be set up to 99 minutes or continuous run